Copyright (C) 2002 - 2011 Inditron India Electronics Pvt Ltd ( Previously Known as Inditron India Corporation )
All Rights Reserved.
Recycle Electronics
Backplanes
PCI Back Planes
cPCI Back Planes
• Form factor 3 U - Dimension (WxH): 120.6 mm x 128.7 mm
• 6 slots, 5 peripheral slots; system slot on left side
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Controlled impedance of 65 Ohm realized by striplinetechnology
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully
shielded 10-layer PCB
• Best decoupling of supply voltages
• Connectors according to IEC 61076-4-101 and PICMG 2.0
• V(I/O) selectable by wiring: 3.3 V or 5 V
• Power supply connection via Faston or M4 screw
• Auxilliary signals accessible at 5-pin header
• 6 slots, 5 peripheral slots; system slot on left side
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Controlled impedance of 65 Ohm realized by striplinetechnology
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully
shielded 10-layer PCB
• Best decoupling of supply voltages
• Connectors according to IEC 61076-4-101 and PICMG 2.0
• V(I/O) selectable by wiring: 3.3 V or 5 V
• Power supply connection via Faston or M4 screw
• Auxilliary signals accessible at 5-pin header
• Form factor 3 U - Dimension (WxH): 80.28 mm x 128.7 mm
• 4 slots, 3 peripheral slots; system slot on right hand side
• Operates at 33 and 66 MHz clock frequency
• 32-bit implementation
• Rear Panel I/O on P2 at all Slots
• AB-shrouds with guides for safe mating of rear I/O transition modules
• Controlled impedance of 65 Ohm realized by stripline-technology
• Hot-swap features according to PICMG 2.1 R2.0
• High performed decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully shielded PCB
• Flexible grounding to chassis by fixing screws
• Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0
• V(I/O) selectable by jumper element: 3.3 V or 5 V
• Power supply connection via M3 threaded bolt
• Extension/cascading feature to other modular backplanes
• 4 slots, 3 peripheral slots; system slot on right hand side
• Operates at 33 and 66 MHz clock frequency
• 32-bit implementation
• Rear Panel I/O on P2 at all Slots
• AB-shrouds with guides for safe mating of rear I/O transition modules
• Controlled impedance of 65 Ohm realized by stripline-technology
• Hot-swap features according to PICMG 2.1 R2.0
• High performed decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully shielded PCB
• Flexible grounding to chassis by fixing screws
• Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0
• V(I/O) selectable by jumper element: 3.3 V or 5 V
• Power supply connection via M3 threaded bolt
• Extension/cascading feature to other modular backplanes
• Form factor 3 U - Dimension (WxH): 171.5 mm x 128.7 mm
• 8 slots, 7 peripheral slots; system slot on left side
• PCI signal termination according to PICMG 2.0
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Controlled impedance of 65 Ohm realized by
stripline-technology
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully
shielded 10-layer PCB
• Connectors according to IEC 61076-4-101 and PICMG 2.0
• V(I/O) selectable by wiring: 3.3 V or 5 V
• Power supply connection via Faston or M4 screw
• Auxilliary signals accessible at 5-pin header
• 8 slots, 7 peripheral slots; system slot on left side
• PCI signal termination according to PICMG 2.0
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Controlled impedance of 65 Ohm realized by
stripline-technology
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully
shielded 10-layer PCB
• Connectors according to IEC 61076-4-101 and PICMG 2.0
• V(I/O) selectable by wiring: 3.3 V or 5 V
• Power supply connection via Faston or M4 screw
• Auxilliary signals accessible at 5-pin header
• Form factor 6 U - Dimension (WxH): 202.2 mm x 262.05 mm
• 8 slots, 7 peripheral slots; system slot on left hand side
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Rear Panel I/O on P3, P4, P5 at all Slots
• A and AB-shrouds with guides for safe mating of rear I/O transition modules
• Controlled impedance of 65 Ohm realized by stripline-technology
• Hot-swap features according to PICMG 2.1 R2.0
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully shielded 10-layer PCB
• Flexible grounding to chassis by fixing screws
• Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0
• V(I/O) selectable by jumper element: 3.3 V or 5 V
• 2 connectors for fans with 12V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/12V supply
• For use with modular power supply according to PICMG 2.11 R1.0
• Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards
• Extension/cascading feature with system slot right backplane and power backplane
• Accessories available: power backplane, power bridge
• 8 slots, 7 peripheral slots; system slot on left hand side
• Operates at 33 MHz clock frequency
• Full 64-bit implementation
• Rear Panel I/O on P3, P4, P5 at all Slots
• A and AB-shrouds with guides for safe mating of rear I/O transition modules
• Controlled impedance of 65 Ohm realized by stripline-technology
• Hot-swap features according to PICMG 2.1 R2.0
• Best decoupling of supply voltages
• High-quality design with best EMC-characteristics by fully shielded 10-layer PCB
• Flexible grounding to chassis by fixing screws
• Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0
• V(I/O) selectable by jumper element: 3.3 V or 5 V
• 2 connectors for fans with 12V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/12V supply
• For use with modular power supply according to PICMG 2.11 R1.0
• Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards
• Extension/cascading feature with system slot right backplane and power backplane
• Accessories available: power backplane, power bridge
VME Back Planes
• Meets or exceeds ANSI/VITA 1.1-1997, VME extension standard
• Exceeds ANSI/VITA 1-1994 and IEEE P1014 specifications
• 10-layer controlled impedance stripline design
• Active BUSGRANT, IACK daisy chain
• Power bugs on top and bottom of slots
• Superior power distribution
• Virtually zero crosstalk
• Backplane stiffeners to provide durability, reliability
• 10-layer board
• 2 oz. copper power and ground
• PCB UL recognized 94V-0
• PCB FR-4 or equivalent
• PCB .125" thick
• 6U height
• 5, 8, 12, 14, 15 and 21 slots
• Exceeds ANSI/VITA 1-1994 and IEEE P1014 specifications
• 10-layer controlled impedance stripline design
• Active BUSGRANT, IACK daisy chain
• Power bugs on top and bottom of slots
• Superior power distribution
• Virtually zero crosstalk
• Backplane stiffeners to provide durability, reliability
• 10-layer board
• 2 oz. copper power and ground
• PCB UL recognized 94V-0
• PCB FR-4 or equivalent
• PCB .125" thick
• 6U height
• 5, 8, 12, 14, 15 and 21 slots
PXI Back Planes
• 8 sots 3U Backplane
• Fits within standard 3U Eurocard aperture
• Compliant with PXI Rev.2.0 and PICMG 2.0 R3.0
• Hot Swap compliant per PICMG 2.1 R2.0
• 64 bit wide CPCI-bus, 33/66MHz clock
• 10MHz clock driver on backplane, selectable between backplane oscillator or star trigger slot
• Left hand system slot, star trigger slot, 6 peripheral slots
• VIO user configurable
• Power connections with power bolts and ATX power connector on system slot extension area
• Connector for SMB-bus
• Connector for auxiliary signals (DEG, FAL, PRST,.)
• Connector for drives/power (+5V, GND, +12V)
• Impedance controlled at 65O/75O
• Matched length for PXI_CLK10 and PXI_STAR - signals
• Material flammability rating of UL94V-0
• Fits within standard 3U Eurocard aperture
• Compliant with PXI Rev.2.0 and PICMG 2.0 R3.0
• Hot Swap compliant per PICMG 2.1 R2.0
• 64 bit wide CPCI-bus, 33/66MHz clock
• 10MHz clock driver on backplane, selectable between backplane oscillator or star trigger slot
• Left hand system slot, star trigger slot, 6 peripheral slots
• VIO user configurable
• Power connections with power bolts and ATX power connector on system slot extension area
• Connector for SMB-bus
• Connector for auxiliary signals (DEG, FAL, PRST,.)
• Connector for drives/power (+5V, GND, +12V)
• Impedance controlled at 65O/75O
• Matched length for PXI_CLK10 and PXI_STAR - signals
• Material flammability rating of UL94V-0
• 18 sots 3U Backplane
• Fits within standard 3U Eurocard aperture
• Compliant with PXI Rev.2.0 and PICMG 2.0 R3.0
• Hot Swap compliant per PICMG 2.1 R2.0
• 64 bit wide CPCI-bus, 33MHz clock
• 10MHz clock driver on backplane, selectable between backplane oscillator or star trigger slot
• Left hand system slot, star trigger slot, 16 peripheral slots
• 3 CPCI-segments of 6 slots each
• 2 rear pallet PXI-bridges mounted on extended front connector pins
• VIO user configurable
• Power connections with ELCON lower Drawer connector
• Connector for SMB-bus
• Connector for auxiliary signals (DEG, FAL, PRST,.)
• Connector for drives/power (+5V, GND, +12V)
• Impedance controlled at 65O/75O
• Matched length for PXI_CLK10 and PXI_STAR - signals
• Material flammability rating of UL94V-0
• Fits within standard 3U Eurocard aperture
• Compliant with PXI Rev.2.0 and PICMG 2.0 R3.0
• Hot Swap compliant per PICMG 2.1 R2.0
• 64 bit wide CPCI-bus, 33MHz clock
• 10MHz clock driver on backplane, selectable between backplane oscillator or star trigger slot
• Left hand system slot, star trigger slot, 16 peripheral slots
• 3 CPCI-segments of 6 slots each
• 2 rear pallet PXI-bridges mounted on extended front connector pins
• VIO user configurable
• Power connections with ELCON lower Drawer connector
• Connector for SMB-bus
• Connector for auxiliary signals (DEG, FAL, PRST,.)
• Connector for drives/power (+5V, GND, +12V)
• Impedance controlled at 65O/75O
• Matched length for PXI_CLK10 and PXI_STAR - signals
• Material flammability rating of UL94V-0