Copyright (C) 2002 - 2011 Inditron India Electronics Pvt Ltd ( Previously Known as Inditron India Corporation )
All Rights Reserved.
Recycle Electronics
Communication Interfaces
ARINC 429 Interface board with 6 TX and 6 RX channels
•6 ARINC 429 TX channels
•6 ARINC 429 RX channels
•High (100 kHz) or low (12.5 kHz) speed selectable by channel
•Hardware Label filtering
•Hardware TX scheduler (100 µs timing resolution)
•Automatic timestamping of RX data (if desired)
•Powerful API included
•6 ARINC 429 TX channels
•6 ARINC 429 RX channels
•High (100 kHz) or low (12.5 kHz) speed selectable by channel
•Hardware Label filtering
•Hardware TX scheduler (100 µs timing resolution)
•Automatic timestamping of RX data (if desired)
•Powerful API included
•32-bit PCI Bus Master Operation
•Wake-on-LAN (WOL) for Power Management
•IEEE 802.3x Flow Control, IEEE 802.1Q VLAN Support, and IEEE 802.1p Priority Tagging
•Multi-OS Support
•Wake-on-LAN (WOL) for Power Management
•IEEE 802.3x Flow Control, IEEE 802.1Q VLAN Support, and IEEE 802.1p Priority Tagging
•Multi-OS Support
This product is an interface board of PCIe bus conformity equipped with Bus master in accordance with IEEE - 488.1 and IEEE - 488.2. It can perform communication control or data analysis of GPIB bus line of various machinery having GPIB interface with a PC. GPIB communication driver (API-PAC(W32)) for Windows version GPIB communication, LabVIEW Attachment. Using a collection of ActiveX components, you can more easily develop a higher-performance application in a short term.
•Supports RS232, RS422, RS485 2 wire, and RS485 4 wire modes
•Each port can be set independently
•Built-in ESD (Electro-Static Discharge) protection
•Compliant with PCI Rev. 2.2 specifications
•PCI Power Management Rev. 1.1 compliant
•921.6Kbps maximum baud rate per port
•Jumper configuration for mode, echo, and termination setting
•WHQL drivers
•Each port can be set independently
•Built-in ESD (Electro-Static Discharge) protection
•Compliant with PCI Rev. 2.2 specifications
•PCI Power Management Rev. 1.1 compliant
•921.6Kbps maximum baud rate per port
•Jumper configuration for mode, echo, and termination setting
•WHQL drivers
•2 Port PCI Express 10/100/1000 Gigabit Ethernet Network Adapter Card, network adapter, 2 ports
•Dimensions (WxDxH): 4.3 in x 2.9 in
•Weight: 7.1 oz
•Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
•Data Transfer Rate: 1 Gbps
•Network / Transport Protocol: TCP/IP, UDP/IP
•Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x
•Dimensions (WxDxH): 4.3 in x 2.9 in
•Weight: 7.1 oz
•Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
•Data Transfer Rate: 1 Gbps
•Network / Transport Protocol: TCP/IP, UDP/IP
•Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x
•CAN 2.0A and CAN 2.0B supported
•Two independent CAN communication ports
•CAN transfer rate up to 1 Mbps
•2 KV optical isolation protection
•LED for transmit/receive status on each port
•Optional 120 ohm terminal resistor for CAN bus network
•DLL library and examples included
•Windows driver provided
•Two independent CAN communication ports
•CAN transfer rate up to 1 Mbps
•2 KV optical isolation protection
•LED for transmit/receive status on each port
•Optional 120 ohm terminal resistor for CAN bus network
•DLL library and examples included
•Windows driver provided
Arinc 429 Interface Board
CAN Interface Board
2 Port PCIe Ethernet Interface Board
2 Port Serial Interface Board
PCIe GPIB Interface Board
Optical Fiber Fast Ethernet Card
•Up to 64 ARINC 429 channels per board (32 Rx, 32 Tx maximum)
•Highly flexible configurations
•Mix multiple protocols on the same board (ARINC 429, MIL-STD-1553, ARINC 708, ARINC 717, RS-232, RS-422, etc.)
•Based on IP Module mezzanine technology
•Support for LabVIEW
•Highly flexible configurations
•Mix multiple protocols on the same board (ARINC 429, MIL-STD-1553, ARINC 708, ARINC 717, RS-232, RS-422, etc.)
•Based on IP Module mezzanine technology
•Support for LabVIEW
VME/VXI MIO