Recycle Electronics
|
|
|
|
|
|
Digital Input and Output Interfaces
•128-channel, 16-bit PCI digital I/O board
•For PCI bus
•128 lines (5 V/TTL) of I/O in 16-bit ports
•Generate interrupts on any line
•Four separate high-speed IRQ lines (100 ns)
•User-defined power-up state in 16-bit groups (High, Low, Tri-stated)
•Two Enhanced Synchronous Serial Interfaces (ESSIs) for high-speed devices such as codecs
•Three clock/interrupt lines, three 24-bit counters/timers
•Onboard 16-bit FIFO: 2k samples
•Port-scan list
•PowerDAQ Software for Windows NT/2000/XP and Linux/RTLinux
128 Line DIO
•64-channel, 16-bit PCI digital I/O board
•For PCI bus
•64 lines (5 V/TTL) of I/O in 16-bit ports
•Generate interrupts on any line
•Four separate high-speed IRQ lines (100 ns)
•User-defined power-up state in 16-bit groups (High, Low, Tri-stated)
•Two Enhanced Synchronous Serial Interfaces (ESSIs) for high-speed devices such as codecs
•Three clock/interrupt lines, three 24-bit counters/timers
•Onboard 16-bit FIFO: 2k samples
•Port-scan list
•PowerDAQ Software for Windows NT/2000/XP and inux/RTLinux
64 Line DIO
•PCI bus
•Up to 56/24(PIO-D56/PIO-D24) channels of digital I/O
•All I/O lines buffered on the board
•Eight-bit groups independently selectable for I/O on 24-bit port
•Input / Output programmable I/O ports under software control
•Double side SMD, short card.
•Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R, DB-24POR, DB-24SSR, DB-24C or any •OPTO-22 Compatible daughter boards
•4 interrupt sources: PC0,PC1,PC2,PC3
•High driving capability
•Automatically detected by windows 95/98/NT/2000/XP
•No base address or IRQ switches to set
•Optional Cable and UIO-37F-1 Terminal Panel or Cable and DN-20 Terminal Panel for easy wiring for voltages
Isolated DIO
•24 digital I/O lines
•High current output available
•37-pin connector
•One 32-bit counter
Software
•Universal Library includes support for Visual Studio® and Visual Studio® .NET, including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET
•Comprehensive drivers for DASYLab® and NI LabVIEW™
•Supported by MATLAB® Data Acquisition Toolbox™
•Software utility for installation, calibration, and testing
•Supported Windows® Operating Systems: Windows 7/Vista/XP SP2,32-bit or 64-bit
USB DIO